Anyone straightened Tomahawk blades before?

[yojoebro82]

Can it be done?

Any tips?

Thanks!

[Lt. Night Viper]

If your blades are still attached, prop the Tomahawk upside down for a little while, let gravity do the work. I currently have mine propped up this way. However I'm not sure if that will work for heavy drooping. This will work for mild/moderate drooping though.

[yojoebro82]

Mehhhh....one of my blades is actually curved "up" a little bit. Has been for years.

I was wondering if you can heat them in some way...?

[Hector the Collector]

I heat them up with a hair dryer and once they get heated up some, I straighten them up. You just have to keep working with them, while the blades are still heated up. It's worked for me.

[The Amazing Mutato]

I got a large pasta pot boiled some water and let them simmer for around a minute. Layed them flat on the counter and laid a large book on them. Let them cool and now they are straight and strong!

[yojoebro82]

I got a large pasta pot boiled some water and let them simmer for around a minute. Layed them flat on the counter and laid a large book on them. Let them cool and now they are straight and strong!

I'm going to try that this Christmas season when I'm at the parent's place. Tomahawk is still in their basement.

[StkhlmDK]

I heat them with the mrs hairdryer on a flat surface and then quickly under the cold water to give them a "shock", so far I have used that on 3 sets of blades with success